Saves waste-- cut only the amount you need. Great for curves, arches and unusual angles.

Specification:
The Corner Tape comes in consumer and contractor roll sizes varying in size from 7. 6m (25'), 30m(98. 4") and 30. 5m (100') rolls. Other length upon customer's request.

Packaging:
Supplied in a cardboard dispenser, 10 or 20 rolls per pack

How to use:
1. Cut flexible metal Corner Tape into one of the two strips with a knife to score and bend. The distance between your cuts will depend on how tight a radius you want to chieve. Apply generous coat of joint compound to a depth of 1/8", covering both sides of the corner the same time. With the metal facing the wall, fold tape at the center margin and press firmly into the compound.

2. Once the corner is embedded, remove excess compound with taping knife. After the first coat dries, sand lightly, apply finish coat and feather edges two inches beyond edges of the first coat. If needed apply a second coat 6"- 10" wide on each side of corner. When dry, sand lightly if needed. The wide, galvanized steel strips act as a guide to ensure straight, reinforced angles for both "inside" and "outside" corner needs.

Caution: Apply Flex Metal Corner Tape only at the recommended temperatures of the joint cement used. Store tape in closed cartons at normal room temperature in an enclosed, dry shelter.

Limited Warranty: This product is warranted to be uniform and of the highest quality. Our company shall not assume any responsibility, directly or indirectly, for any loss caused by application of this product not in accordance with directions. All labor costs are excluded from this warranty. Our liability under this warranty shall in no case exceed the purchase price of the quantity of our product used with respect to which damages may be claimed. All claims shall be considered null and void unless submitted within 30 days from date of alleged defect.
 

The news come from www.bossgoo.com

Corner Tape